MOST POPULAR SERVICES DONE BY US
- "WE SELL REELS" - AUTHORIZIED DEALER for Penn, Okuma, Accurate & Avet
- Penn Torque, Fathom or Fathom II lever drag 2-speed series *Blueprinting & special low or high gears*
- Penn Internationals *Blueprinting.. & special low or high gears ... different handles or knobs*
- Shimano Tiagra 80w *Blueprint plus, modified 130 handle assembly & special low or high gears*
- Shimano Talica 2-speed 8, 10, 12, 16 *Blueprinting & (12, 16) lower low gears*
- Shimano Talica 2-speed 20, 25, 50 *Blueprinting, lower low speed gear & dog springs*
- Shimano Tiagra & Avet EX series *Blueprinting and lower low gears*
- Okuma Makaira series *Blueprinting & easy shift button
- Accurate ATD series *Blueprinting & easy shift button*
- Return for general service on all reels that have been Blueprinted before by us
FAQ's....
What's Blueprinting? ... The process includes machining the stainless plate and cam in your reel. We then service the whole reel ... after that we custom build your reel so it has 1-2 pounds of drag when you put your reel just into gear. Then we build your reel for the specific amount of drag that you asked for at strike or full ... for example 25#'s of drag at strike. Additionally we have a few models where we can do what's called Blueprint plus ... what that does is guarantee is: 50% more drag pressure when sliding the lever from the strike position up to full/sunset.
Can we just service a reel and not blueprint it? ....We do offer regular service on reels, but first time through our shop your reel “must” be Blueprinted by us. Also Blueprinting / service does not include cost of replacement drag washer if needed. Reel blueprinting and servicing does also not include the cost of replacement parts such as bad bearings or broken parts.
Do you sell / put on braid? ... Yes... We use a variety of different brands of hollow and solid braid. Usually best if you call to discuss top shot length and then we can give you all the details.
Do you clean braided line? ...We offer Braid removal & cleaning for your reels. We will remove your Braid, wash your Braid in warm water and completely dry it, inspect the Braid and clean your spool. We then apply Carnauba wax to your spool, and we will re-spool the line back onto your reel. The cost to do this is $60 min for the first 400yds and $10/per 100yds over 400yds. NOTE: ... We have found it's best to NOT have us clean SOLID braid ... only have us clean HOLLOW braid ... reason being is by the time you spend the money to clean solid you could have just about bought brand new solid. This is why we don't recommend cleaning solid braid.
Do you NEW sell reels? Yes.... We are an authorized seller for Okuma, Penn, Accurate & Avet. Call us if you think you are interested in getting a new reel.
Gears... Higher high speed or Lower low speed? Yes ...We can ... depending on the reel model and sizes of your reel ... quite often we have gear modifications.
Handles? Knobs? ...In recent year’s fisherman have been looking to gain even more advantage while fishing. In turn they have been putting longer handles on their reels to gain even more power. Also, fishermen have been experimenting with different handle knobs on their reel. We can also put a longer handle on your reel depending on which one you currently have and/or we can just change your ‘handle knob’ to one that feels more comfortable to your preference. We have done this to numerous manufacturers reels. So if your favorite reel can use a longer handle or just a different knob, you can check with us and we’ll see what we can do for you to make that reel even better.
Why don't you hire someone else so you can get more reels done? In short the answer is this .... (Cal / Eric) We both work on every reel that comes through the shop and we build them like they were our own reels. We don't cut any corners ... and having a 1st class reputation is everything to us... and we stand behind all of our work. We are lucky that our customers are so awesome and understanding that the custom building of their reels is not something that can be done efficiently overnight. This is partially why we are usually months behind...
UNIVERSAL - STAR DRAG & REEL GREASE
MAXIMUM CORROSION PROTECTION - FORTIFIED WITH PTFE AND POLYMERS - LITTLE OR NO DRAG ACCELERATION - BABY BOTTOM SMOOTH STAR DRAGS - SUPERIOR HEAT AND WEAR RESISTANCE - SAFE ON ALL METALS AND COMMON PLASTICS - REDUCES GEAR TRAIN FRICTION FOR EASIER CRANKING - IT'S THE ONLY GREASE YOU'LL EVER NEED FOR REELS !!
OUR GREASE IS USED BY DOZEN'S OF REEL MANUFACTURERS ALL OVER THE WORLD.
It's different!!! We took the best qualities from several greases
1 ounce for $8 or 1 pound for $35
grease can be bought here...https://www.cals2speed.com/grease.php
BRAID
Is your Braid line tight on your reel?Is there corrosion on your spool or in your Braid line...
Cal’s now offers Braid removal & cleaning for your reels. We will remove your Braid, wash your Braid in warm water and completely dry it, inspect the Braid and clean your spool. We then apply Carnauba wax to your spool, and we will re-spool the line back onto your reel. The cost to do this is $60 min for the first 400yds and $12/per 100yds over 400yds.
Splices are $15.00 each
In addition to Braid cost, we also charge $20 per reel for removing your old line, cleaning & inspecting your spool, adding electrician tape and Carnauba wax. We install the Braid with good tension & label your reel.
LOW SPEED GEARS (LSG)
This one has really been talked about by manufacturers & fishermen! We make lower-speed gears for the big fish or if you are having a hard time turning the handle. We put them in the following reels.
PENN Torque & Fathom 15XNLD2, 25NLD2, 30LD2 (2.25-to-1)
PENN Torque & ALL Fathom 40NLD2, 60LD2, 60NLD2, 80LD2 (1.6-to-1, 1.9-to-1, 2.5-to-1)
PENN 16VS, 16VSX (1.3-to-1)
PENN 20VISX, 30VISX, 30VISW (1.15-to-1)
PENN 50VISX, 50VISW (1-to-1)
PENN 50’s, 80's (1-to-1)
PENN 70VIS (1-to-1)
ACCURATE ATD 6, 12 (4-1 & 1.7-to-1)
AVET EX 30/2, EXW 30/2 (1.5-to-1)
AVET EX 50/2, EX 50W 50/2 (1-to-1)
SHIMANO Talica, Speedmaster 12, 16 (2.4-to-1)
SHIMANO Talica, Speedmaster 20, 25 (1.6-to-1)
SHIMANO Talica 50 (1.2-to-1)
SHIMANO Tiagra 20, 30, 30W (1.2-to-1)
SHIMANO Tiagra 50, 50W, 80W (1-to-1, 1.8-to-1)
SHIMANO Tiagra 130 (1.52-to-1)
HIGH SPEED GEARS (HSG)
We also make higher speed gears for using while jig fishing or if you need to retrieve a larger amount of line in a hurry!!
PENN Torque & ALL Fathom 15XNLD2, 25NLD2, 30LD2 (6.6-to-1)
PENN Torque & ALL Fathom 40NLD2, 60LD2, 80LD2 (4.2-to-1, 5.1-to-1, 6-to-1, 7.1-to-1)
PENN 16VISX (5.2-to-1)
PENN 50VISX (4.1-to-1)
PENN 50’s, 50W’s (4-to-1)
SHIMANO Tiagra 50, 50W (3.8-to-1)
SHIMANO Tiagra 80W (3.1-to-1) or (3.8-to-1)
SHIMANO Tiagra 130 (2.5-to-1, 2.7-to-1, 2.9-to-1)
